Service

1. Take out the iron, open the water cap, and add purified water or tap water to the water inlet. Be careful not to spill water on other parts of the iron to avoid electric shock, and do not exceed the MAX water level of the water tank when adding water. 2. Wipe off any water droplets on the iron with a cloth; Check if the voltage of the iron matches the power grid, and plug it in after confirming it is correct. 3. Select the corresponding temperature range based on the fabric material you want to iron, and then turn the temperature knob to start heating; Silk and wool fabrics have lower temperatures, while cotton fabrics have higher temperatures. Don't ignore this step, otherwise the clothes may be wrinkled or damaged by ironing. During the heating process of an electric iron and the intervals between ironing, the iron should be placed upright and not casually placed on the side, as it can easily burn out items that come into direct contact with the iron. After the steam iron is used up, if there is still residual water, either pour it out or continue to power it on until the water is boiled dry. If the water is not evaporated completely, it may leak out on its own, adhere to the bottom plate, and leave water stains, which is not conducive to the maintenance of the machine.

The reason is that the local water quality is too hard (the water contains a lot of calcium and magnesium ions), and after long-term use, scale accumulates in the bottom plate, causing the steam to decrease. Suggest using purified water; Alternatively, you can frequently use the automatic cleaning function of the iron to clean the bottom plate. When cleaning, add a small amount of colorless vinegar to the water tank for better results.

The reason why clothes shine and turn white after ironing is that the selected temperature is too high. Directly ironing the surface of the clothes with an iron will make them shine or turn white. You should choose the appropriate temperature based on the fabric, cover it with an inner cloth or a homogeneous fabric before ironing, so that this phenomenon will not occur. The reason for uneven ironing of clothes is that the temperature is too low or the ironing process is too dry. It should be adjusted to a suitable temperature, and wet the cloth with spray during ironing, or turn on steam. When using an iron to iron clothes, it is necessary to first understand the material characteristics of the clothes in order to control the temperature. For example, some chemical fibers should not be too hot, while others should not be afraid; Some natural fibers such as silk and wool are not suitable for high temperatures, while cotton and linen are not afraid. In addition to the temperature dial on the iron, there will also be clear markings on the laundry label.

The platform is an iron with a boiler and pressure, and its English name is steamstation, which means steam station. The characteristic is that the iron can spray strong steam with high temperature and pressure. Suitable for regular ironing and hanging ironing. And use powerful steam jets to clean carpets, kitchens, and other hygiene blind spots. Principle; High temperature and high pressure steam is generated by the boiler inside the base, and after the solenoid valve is opened, it rushes to the iron bottom plate. After the second heating of the bottom plate, strong steam is sprayed out

1. Water spray function - When the clothes are very dry, you can press the water spray button, and the nozzle will spray water mist to wet the clothes. 2. Vertical explosion steam - can spray strong steam when the iron is in a vertical state, especially suitable for clothes to be hung and ironed. 3. Ordinary continuous steam - After heating the iron base, turn on the steam button and adjust it from 0 to MAX; There will be steam on the bottom plate. 4. Low temperature leak proof function - It can prevent water droplets from leaking out of the steam holes on the bottom plate when the temperature is too low during ironing. After use, it can avoid the problem of bottom plate water leakage caused by forgetting to turn off the steam button. 5. Automatic cleaning function - When the iron is filled with water and heated, tilt the iron head downwards at a 45 degree angle and press the automatic cleaning button. Hold for about 30 seconds, then tilt the iron head downwards at a 45 degree angle. At this point, water and steam will rush out from the bottom plate; Achieve the effect of cleaning the bottom plate.